On this page you will find some examples of customized sewer rehabilitation vehicles. Please click on the picture for enlargement.
Rehabilitation vehicle for BMH, Czech Rep.
BMH received a complete trailer with an effective load capacity of nearly 15 tons and a total length of over 10 meters.
Heart of the system is the inversion drum for liners up to ID 1000mm (40“).
Technical data
- 2-axle turntable trailer incl box body
- inversion drum , front loader Ø 2200 ID 1000mm (40“) with sight glasses and LED Interior Lighting
- inversion socket set ID 100 – ID 800 (4“ – 32“)
- compressed air storage 200 liter incl connection
- steam unit, Type GS 120, 2-stage with Riello-burner (1200kg/h steam capacity)
- water tank system 2 x 1500 liter with filling and automatic shut-off
- additional steam extraction point incl cut-off-cock
- auxiliary heating with tank system
- 4 flashing lights
- 600 litres fuel oil tank (heating)
- water softener
- first aid kit, eyewasher, trash bin, manhole hooks, protection foil roller, fire extinguisher, safety goggles
Rehabilitation container Arpe Swiss Reline
Rehabilitation container 1 for Arpe Swiss Reline
Reline BlueLiner DN 1000
- swap body 7.45 m for train loading and helicopter transport
- with 2 rear doors, one personnel on the side (2 m) and a loading frontally
- vehicle bodywork basic container
- CCM mixing module (Resin mixing unit with a mixing capacity of 52 Kg/min)
- 2 x 1500 ltr. resin tank and 1 x 1000 ltr. hardener tank
- vacuum pump 40m²/h with PLC-connection and pressure regulator
- impregnation unit (calibration table) ID 1000mm (40“) with conveyor belt – fully automatic with PLC-connection
- Conveyor belt for Inliner to DN1000 at work desk, synchronic speed with the rollers
- auxilliary heating 3.5 kW with tank system and external filling
- incl. accessories, suction lances and vacuum shut-off clamps up to ID 1000mm (40“)
Rehabilitation container 2+3 for Arpe Swiss Reline
Inversion drum+aggregates
- swap body 3,68 m for train loading and helicopter transport
- inversion drum , front loader Ø 2200 ID 1000mm (40“) with sight glasses and LED Interior Lighting
- inversion socket set ID 100 – ID 800 (4“ – 32“)
- Blue Line Inliner cooling device
- swap body 3,68 m for train loading and helicopter transport
- 2 x compressed air system Atlas Copco XAS 97
- 1 x generator Atlas Copco QAS 40
- 400 l diesel fuel tank
Rehabilitation container 4+5 for Arpe Swiss Reline
- swap body 3,68 m for train loading and helicopter transport
- inversion drum , front loader Ø 2200 ID 1000mm (40“) with sight glasses and LED Interior Lighting
- inversion socket set ID 100 – ID 800 (4“ – 32“)
- Blue Line Inliner cooling device
Steam unit+social room
- swap body 3,68 m for train loading and helicopter transport
- kitchen unit with refrigerator, microwave and sink
- fresh- and waste water tank
- various shelves and cabinets
- foldable table and folding benches
- sockets
UV-rehabilitation vecle for Saertex multiCom
Technial data
- vehicle Mercedes Benz Vario 818 with aluminum box body
- rear deck at box as weather protection roof
- ventilation and extraction for the aggregates
- box isolation 30 mm
- partition to the generator room
- additional tank of 100 ltr. with external filling system
- rear view camera
- staircase a the rear (extendable)
- isolation curtain
- working lights at the rear
- rooflights (warning flasheres)
- warning reflecting foil on the box body
- first aid kit, eyewasher, trash bin, manhole hooks, protection foil roller, fire extinguisher, safety goggles
- work bench with with shelfing system Sortimo
- operator work station with PC and 24“ touch screen
- generator Fischer Panda 30 kW
- air-compressor 420 m² with 18,5 kW output
- UV-curing-system ID150 – ID1200mm (6“ – 48“) consisting of:
- cable reel 300 mtr. (1000 feet) – UV curing calbe with swiveling side arm
- PLC-control of UV-system
- light train ID150 – ID600mm (6“ – 24“) with 2 x 8 UV-bulbs (adjustable from 400 to 650 Watts)
- additional temperature sensors for the light trains
- wheel sets ID150 – ID1200mm (6“ – 48“)
- temperature-resistent front camera on the UV-unit with LED lighting
- UV curing camera
- endcap set ID150 – ID1200mm (6“ – 48“)
- dual core ID600 – ID1200(24“ – 48“) with 2 x 4 UV-bulbs (adjustable from 1000 to1200 Watts)
- pressure testers Messen NORD 1“ with software
- sealing bag set ID150 – DN1200
- hose guide set
Rehabilitation container for Diringer und Scheidel
Technial data
- swap body 7.45 mtr. for a chassis (Mercedes Benz 25420 LL)
- BDF swap body with 2 rear doors, one personnel on the side (2 mtr.) and a loading frontally
- underfloor generator 35 kW for the chassis
- vehicle bodywork Basic
- resin mixer system, 40 kg/min with PLC-control (2 x 1500 ltr. resin tank and 1 x 1000 ltr. hardener tank)
- vacuum pump 40m²/h with PLC-connection and pressure regulator
- impregnation unit (calibration table) ID 1000mm (40“) with conveyor belt – fully automatic with PLC-connection
- auxilliary heating 3.5 kW with tank system and external filling
- incl. accessories, suction lances and vacuum shut-off clamps up to ID 1000mm (40“)
Rehabilitation vehicle MaxLiner for Candlandi, Switzerland
Technial data
- vehicle Mercedes Benz Atego 1024 box body 5,05 mtr.
- rear deck at the box as weather protection roof
- box isolation 25 mm
- rear view camera
- staircase at the rear (extendable)
- isolation-curtain at the rear
- working lights at the rear
- rooflights (warning flashers)
- warning reflecting foil on the box body
- first aid kit, eyewasher, trash bin, manhole hooks, protection foil roller, fire extinguisher, safety goggles
- liner flap ID300mm (12“)
- resin mixer 18 kg/min with PLC-control (resin tank 515 ltr. and hardener tank 185 ltr.)
- vacuum pump 25 m³/h with with PLC-connection and pressure reducer
- impregnation unit (calibration table) ID300mm (12“) electrically driven with PLC-connection
- HotBox (water heating) 85 KW with circulation pump and hose set – with connection to the PLC-system
- Liner-Gun ID 100 – 300mm (4“ – 12“) made of aluminum
- auxiliary heating 3,5 KW with tank system and external filling device
- generator (Fischer Panda – diesel) 12 kW
- air-compressor 705 ltr./min at 10 bar (145 psi) with compressed air storage and 3 extraction points
- shelving-system made of stainless steel
- work bench with storage made of stainless steel
- liner hanger 18 pcs.
- tool-set for rehabilitation system
- accessories, suction lances and vacuum shut-off clamps up to ID 300mm (12“)
How can we help you?
Do you have any questions about a particular product or would you like general information about our production and our service? Then please do not hesitate and contact us.